Airespace AS 1500 빠른 설치 매뉴얼 - 페이지 5

{카테고리_이름} Airespace AS 1500에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airespace AS 1500 15 페이지. Intelligent rf ap

After you have prepared all Airespace APs, reconfigure the Airespace Switch or Appliance so it is not the

Master. A Master Airespace Switch or Appliance should only be used for configuring Airespace APs and

not in a working network. Note that the Master Airespace Switch or Appliance is normally not used in a

deployed network, so the Master Airespace Switch or Appliance setting is automatically disabled upon

reboot or AireOS code upgrade.

After completing

Step 2: Configuring the Airespace AP Before Installation

REAPs, continue with

Step 3: Preparing Mounting

Step 3: Preparing Mounting Locations

On your map, you should have the Airespace AP locations, mounting options, and power options.

MAKE SURE that plenum-mounted Airespace APs use only the metal Projec-

Note:

tion-Mount and Flush-Mount brackets (not the Hanging-Ceiling Clips) and are

powered using Power Over Ethernet (POE) to comply with safety regulations.

•

Find the required mounting locations.

Figure -

Factory-Supplied Mounting Clips

•

Attach the hanging ceiling clips to the Airespace AP. Make sure you leave enough space around

the Airespace AP to plug the CAT-5 cable, optional external antenna cable(s), optional power

supply cable, and optional Kensington MicroSaver Security Cable into the sides of the Airespace

AP.

•

Alternatively, use the optional mounting bases and/or brackets to mark the wall or ceiling

locations for sheet metal, drywall, or other screws. Make sure you leave enough space around

the Airespace AP and brackets to plug the CAT-5 cable, optional external antenna cable(s),

optional power supply cable, and optional Kensington MicroSaver Security Cable into the sides

of the Airespace AP.

12/29/04

90-100tbd-000 Rev 1 (Preliminary 3)

Locations.

Step 3: Preparing Mounting Locations

for all Airespace APs and