Deaf Bonce Machete series 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Deaf Bonce Machete series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Deaf Bonce Machete series 16 페이지. Hf speakers
Deaf Bonce Machete series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (12 페이지), 사용자 설명서 (16 페이지), 소유자 매뉴얼 (8 페이지), 소유자 매뉴얼 (20 페이지), 사용자 설명서 (16 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (16 페이지)

1 . I N T R O D U C T I O N

Thank you for purchasing this Deaf Bonce product of Machete series! Our company is committed to the creation of extremely

high-proﬁle systems with no loss of quality.

To ensure proper use, please carefully read through this manual before using this product. It is especially important that you

read and observe caution's in this manual. Please keep the manual in a safe and accessible place for future reference.

2 . S A F E T Y I N S T R U C T I O N S

1. Fasten the speakers properly when installing it in the vehicle. If the component is disconnected during driving, it may cause

serious damage to the passengers of the vehicle or another vehicle.

2. Before installing the components, if possible store the product in the original package to avoid accidental damage to the

product.

3. Be careful when installing and dismantling the speaker! Do not let the speaker drop to avoid damage of its moving parts.

4. When working with tools follow safety rules.

5. Before the installation switch oﬀ the head unit and all other audio devices to avoid their damage.

6. Make sure that the location of the speaker does not hinder the proper operation of mechanical and electrical devices of the

vehicle.

7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.

ATTENTION!!! The product may be operated at +5 to +40 °C. In case of moisture condensation, let the product to dry.

8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe or

other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.

9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical

devices. Make sure that they are ﬁrmly ﬁxed and protected over the entire length.

10. The diameter of the speaker cables must be selected in accordance with the length and applied power.

11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the

insulating layer, short circuit and ﬁre.

12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies

close to the parts exposed to heat.

3 . W I R I N G D I A G R A M S

Do not expose your ampliﬁer to loads below the value predetermined by the manufacturer.

Various examples of connection types are given at the pages below. Use these examples to determine the required load

impedance of your connection.

S e r i a l c o n n e c t i o n o f t h e s p e a k e r s

CAUTION!!! High sound pressure can damage your health!

Please use the common sense when controlling volume!

Voice coil

4 Ohm х 2 MR

Total impedance

8 Ohm