Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T 매뉴얼 - 페이지 4
{카테고리_이름} Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T 18 페이지. Pack 8
Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 매뉴얼 (18 페이지), 매뉴얼 (18 페이지), 매뉴얼 (18 페이지)
페이지 인쇄
CM
9.2
O
n
the same side of the chassis 5A, insert the
engine mount plate 9K into the rectangle groove in
the beam. The hole with the flange must be facing
upwards, as shown in the illustration. Attach the piece with a type
AM screw. Position the cover plate 2 9I with the smooth side facing
upwards, and fix the piece in place with a type CM screw, using the
middle hole.
9G
9.4
T
the front section of the chassis 5A upside down and put
urn
the front right suspension lower control arm anchor 9A onto the
small slit in the middle of the right beam. At the same time,
insert the free end of the torsion bar 9G into the hole on the side of the anchor
9A. Fix in place with a type IM screw.
9.1
9H
using two type CM screws.
5A
5A
34
T
the front section of chassis and position the cover plate
ake
1 9H on the right beam of the chassis 5A, with the smooth side
of the cover plate facing upwards. Attach the cover plate
9K
9.3
C
insert the wide end of the torsion bar 9G into
arefully
the hole closest to the right beam of the chassis 5A. To attach
the bar, insert a type DM screw from the outer side of the
chassis.
5A
DM
IM
STAGE 9
AM
CM
9I
5A
9A
9G