Deagostini MODEL SPACE Honda CB750 FOUR 조립 설명서 - 페이지 4
{카테고리_이름} Deagostini MODEL SPACE Honda CB750 FOUR에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Deagostini MODEL SPACE Honda CB750 FOUR 16 페이지. Pack 12
Deagostini MODEL SPACE Honda CB750 FOUR에 대해서도 마찬가지입니다: 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (20 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지)
페이지 인쇄
Honda CB750 FOUR: Assembly Guide
3
The headlight LED and its wiring should
now look like this, with the LED itself at
roughly a right angle to the red and
grey wires.
6
The wiring in the headlight case should
now look like this. The headlight LED
should be about 5mm above the hole,
and there should be some slack in the
indicator wires.
36
4
Pull the headlight LED wires out a bit
more (blue arrow), to make certain there
is some slack. To ensure that the indicator
cables don't move, hold them against the
headlight case (red arrows).
7
Top = wide
Bottom = narrow
Locate the cutouts at the top and bottom
of the headlight reflector: one is wide and
the other is narrow.
5
Pull the headlight LED cable
Hold the
black tube
Pull the other end of the headlight LED
cable to bring the LED closer to the hole in
the headlight case.
8
Headlight LED
Hold the headlight reflector with the
wide cutout at the top, and fit it into the
headlight case, making sure the LED comes
through the hole in the centre (circled).