Deagostini MODEL SPACE Honda CB750 FOUR 조립 설명서 - 페이지 4
{카테고리_이름} Deagostini MODEL SPACE Honda CB750 FOUR에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Deagostini MODEL SPACE Honda CB750 FOUR 16 페이지. Pack 12
Deagostini MODEL SPACE Honda CB750 FOUR에 대해서도 마찬가지입니다: 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (20 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지)
페이지 인쇄
Honda CB750 FOUR: Assembly Guide
5
Tighten the type E screw into place, securing the points
cover to the crankcase half.
Screwdriver sizes
With this stage, you have received a long
Phillips screwdriver. While this is also a
size 1 screwdriver, the length and width
of it make it better for accessing harder-
to-reach areas, such as the back of the
recessed area of the right crankcase half
in Step 5.
Selecting the correct tool to use will
make assembling your Honda CB750
much easier.
180
The same size tip
There are many sizes of screwdriver, so choosing the correct one to use can be confusing. This is especially so when
screwdrivers of the same tip size (size 1, size 0 etc) can be either thick or thin, like the two circled above, while two
of a similar size and shape can have different tip sizes, as shown by the two red-handled screwdrivers.
Stage complete
Size 1
Size 0
Always cover the ends of your screwdrivers
when they are not in use, as this will help
prevent damage and injury.