AGT INDUSTRIAL AGT-RC72 제품 설명서 - 페이지 16
{카테고리_이름} AGT INDUSTRIAL AGT-RC72에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AGT INDUSTRIAL AGT-RC72 19 페이지. Skid steer brush cutter
페이지 인쇄Handling safety
Inspection Checklist
This checklist is to be completed prior to every use of the tree shear. DO NOT use a tree
shear that fails inspection until it has been repaired.
Check for damaged hoses or hydraulic leaks. See hydraulic safety precautions in this
manual. Grease all Imbrication points. See lubrication point diagram in this manual.
Check the blade cutting edge. Note: minor blade damage will not affectthe operation of
the shear.
Dress with a grinder periodically.
Check for cracked welds.
Check for bent or damaged components.
Check for damaged cylinder pins.
Check for missing or loose fasteners (bolts, nuts, snap rings, etc.)
Inspector Name
Date
***IMPORTANT***
If you are using your Skid Steer Articulating Brush Cutter as part of a commercial
operation it is HIGHLY recommended that you keep a copy of all inspections performed
on the machine and the Skid Steer Articulating Brush Cutter. Also maintain records of
repairs that are performed as a result of failed inspections. OSHA inspectors will likely
ask for proof that you are taking steps to mitigate risks and to comply with OSHA
regulations. Refer to www.osha.gov on the Internet and search for "1910.266" to display
regulations specific to logging operations.