Maintronic 10.752 매뉴얼 - 페이지 20

{카테고리_이름} Maintronic 10.752에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Maintronic 10.752 20 페이지. Blind actuator
Maintronic 10.752에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

5.5 Operation with pushbutton over L' release phase

Pin 6 (L') is an release phase

to where an external blind pushbutton

can be connected.

WARNING

Please note that the pin for enabling phase L' (pin 6) is always connected to the mains vol-

tage as long as no active movement is being performed via the Casambi control level.

ATTENTION

Only pushbuttons without latching function and no switches may be connected.

The motor can be destroyed if this is not observed.

NOTE

All movements via the „L' path" control are not detected by Casambi. If you use profiles

A,B,C or D, the indication of the horizontal position is no longer correct. Only a travel to one

of the end points (OT/UT) via the control from Casambi „synchronizes" the display with the

real position again.

As soon as a travel command or an automation object is sent, the manual travel is inter-

rupted. If the device is operated in automated mode, the key inputs T1 and T2 (only 10.752)

must be used.

Carl-Zeiss-Str. 10-14

97424 Schweinfurt / Germany

www.maintronic.de

Tel. +49(0)9721-7766 0

Fax. +49(0)9721-7766 18

www.maintronic.de