AFLAMO AV-FS27VEG 소유자 매뉴얼 - 페이지 4

{카테고리_이름} AFLAMO AV-FS27VEG에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFLAMO AV-FS27VEG 16 페이지. Electric stove heater

페이지 인쇄

OPERATION

When the heat function is used for the first time, a slight odor may be

NOTICE

present. This is normal and should not occur again unless the heater

is not used for an extended period of time.

BUTTON

1. Press to turn on flame effect and

enable heater.

Heater switches will not work unless

ON/OFF

this switch is turned on.

2. Press again to shut off the power to

all functions.

1. With power turned on, press to turn

ON/OFF

on low heat (750W).

HEAT

2. Press again to turn off heat.

THERMOSTAT SETTING: Heater must be on for thermostat settings

to work.

1. Turn on: Rotate the knob clockwise to turn on the high heat (1600W).

2. Turn off:

a. Rotate the knob counterclockwise to turn off the high heat (1600W).

TEMP

b. When thermostat reaches the setting temperature, high heat turn off

automatically.

Temperature Limiting Control

This heater is equipped with a Temperature Limiting Control. Should the heater reach

an unsafe temperature, the heater will automatically turn OFF. To reset:

1. Unplug the power cord from the outlet.

2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.

3. Wait 5 minutes.

4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or

lint. If they are, use a vacuum to clean the vent areas.

5. With the POWER switch in the OFF position, plug the power cord back into the

outlet.

6. If the problem continues, have your outlet and wiring inspected by a professional.

CARE AND MAINTENANCE

ALWAYS turn the heater OFF and unplug the power cord from the outlet

before cleaning, changing the light bulbs, or moving this stove. Failure to do

so could result in electric shock, fire, or personal injury.

ACTION / FUNCTION

www.aflamo.com

INDICATION / RESULT

1. Flame effect and power light on

switch turn on.

The heater is now enabled.

2. Power lights, heaters, and

flame effect turn off.

1. Heater and fan turn on low

(750W).

2. Heat and fan turn off. Flame

stays on.