Core CHT 410 서비스 매뉴얼 - 페이지 11

{카테고리_이름} Core CHT 410에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Core CHT 410 16 페이지.

Gear/Blade Assembly

Hardware Required

‐ 2 Wear Washers

‐ 2 Blades – 2 blade supports (top, bottom)

‐ (2) ¼ ‐ 20x .625 Flathead Machine Screws

‐ Cam Gear

‐ Motor/gear box assembly

‐ Grease

Tools Required

‐ Brush

‐ Allen Wrench‐ hex 5/32

1. Place first WEAR WASHER (pic 2)

2. Screw down Blade Support (pic 3)

3. Place first BLADE (bend down‐ pic 4)

4. Brush with grease‐ then spin on CAM GEAR (pics 5,6)

5. Brush again‐ then place second BLADE (pics 7,8)

6. Rotate CAM GEAR one complete turn to ensure

gears spin freely, and blades are following both CAMS,

leave gear so cam is to the extreme left, or right, to

Leave the smallest gap possible in slots. (pic 8)

7. Add grease to back corners. (pic 9)

8. Place second Wear Washer. (pic 9)