Maipu SM3100-28TC-AC 설치 매뉴얼 - 페이지 19

{카테고리_이름} Maipu SM3100-28TC-AC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Maipu SM3100-28TC-AC 19 페이지. Mypower s3100 series

S3100 Install Manual (For SM3100-28TC-AC and SM3100-52TC-AC) V4

Insert one end of the power cable provided in the accessory kit into

the power socket in the back panel of the switch, and the other end to

the power source socket with overload and leakage protection.

Check if the Power indicator lamp in the front panel of the switch is on.

MyPower S3100 is self-adjustable according to the input voltage. As

long as the input voltage is in the range printed on the switch back

panel, the switch can operate normally without extra adjustment.

The switch will implement self-testing when powered on.

Caution

The input voltage must be within the required range, otherwise the switch

could be damaged or operate abnormally. If after being powered on, the

Power indicator lamp is still off or the self-testing is incorrect, please

contact your provider or the client-service center. Do not open the switch

without permission, to prevent accidental loss or physical injury.

Maipu Confidential & Proprietary Information

Figure 2-3 Attaching power cable to MyPower S3100 switch

Page 19 of 19