HIKOKI WR27A 취급 지침 매뉴얼 - 페이지 10

{카테고리_이름} HIKOKI WR27A에 대한 취급 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKOKI WR27A 12 페이지.

Before using the tool for the first time

Prepare the compressed air connection.

Do not fit quick-lock couplings directly to the compressed air connection.

Never screw the enclosed connection pieces for quick-lock couplings directly onto the compressed air

connection. - simply screw the hose connection onto the device and then connect the compressed air

hose to this. The compressed air hose between the compressed air connection and a quick-lock

coupling must be at least 20 cm in length. If fitted too close to the device, a quick-lock coupling may fail:

whiplashing hoses can cause serious injury as a result.

- Screw the enclosed hose connection on the compressed air connection : using an openend spanner,

secure the compressed air connection against twisting and then screw on the hose connection with

another open-end spanner. See Fig. A.

- Fit the enclosed ear hose clamp onto the compressed air hose that you want to connect.

- Push the compressed air hose onto the hose connection as far as it will go.

- Slide the ear hose clamp onto the hose connection. Using a suitable pliers, pinch the ear (see Fig. B).

Air connection

Hose connection

Ear hose clamp

Air hose

Fig.A

Fig.B

Pinch the ears