Gree FLEXX48C 설치 매뉴얼 - 페이지 9

{카테고리_이름} Gree FLEXX48C에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree FLEXX48C 19 페이지. A coils

4.1.3 Codes & Regulations

This product is designed and manufactured to comply with national codes. It is

installer's responsibilities to install the product in accordance with such codes and/or

any prevailing local codes/regulations. The manufacturer assumes no responsibilities

for equipment installed in violation of any codes or regulations.

These instructions are intended as a general guide and do not supersede local or

national codes in any way. Authorities who have jurisdiction should be consulted before

installation.

4.1.4 Replacement Parts

When reporting shortages or damages, or ordering repair parts, give the complete

product model and serial numbers as stamped on the product. Replacement parts for

this product are available through your contractor or local distributor.

4.2 Location

outdoors.

When installing the coil, take consideration to minimize the length of refrigerant

tubing as much as possible. Do not install the air handler in a location either above or

below the condenser that violates the instructions provided with the condenser. Service

clearance is to take precedence. Allow a minimum of 25" in front of the unit for service

clearance, as shown below.

This coil is designed for indoor installation only. Do not install it

Not suitable for use with ammonia.

A-Coil