Adeunis RF MOTION V2 기술 참조 매뉴얼 - 페이지 14
{카테고리_이름} Adeunis RF MOTION V2에 대한 기술 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Adeunis RF MOTION V2 15 페이지. 868 eu - lorawan/sigfox
페이지 인쇄Decoding example:
Offset
Data
(in byte)
0
0x33
1
0x80
2
0x04
3-4
0x0020
2.2.11 Transmit conditions
Frame
code
0x10
0x1F
0x20
0x30
0x5C
0x5D
0x50
0x51
0x52
2.3 Downlink Frame format
2.3.1 Get applicative configuration (0x01)
Offset
(in byte)
0
When the device receives the downlink, it will generate a product configuration frame (0x10).
2.3.2 Get network configuration (0x02)
Offset
(in byte)
0
When the device receives the downlink, it will generate a network configuration frame (0x20).
2.3.1 Get registers (0x40)
This frame (0x40) allows you to inform the device through the network that it must send the values of specific S3XX
registers in an uplink frame (0x31).
Description
Frame code
Frame counter: 4
Bit1@0: LowBat not detected
invalid register
32: register S032 does not exist (should be S3XX)
Description
Status (configuration)
Digital input
configuration
Network configuration
Keep alive
Periodic data
Presence alarm
Luminosity alarm
Digital input alarm
Data
Description
0x01
Frame code
Data
Description
0x02
Frame code
Manage & optimize your assets & services
283, rue louis Néel 38920 CROLLES, France
Tél : +33 (0)4 76 92 07 77 E-mail : [email protected]
Date: 02/12/2019
Sending conditions
Product start up
•
•
Exit configuration mode (AT command)
Reception of frame 0x01 (get product
•
config)
Product start up if at least one input is
•
activated
•
Product start up
Exit configuration mode (AT command)
•
•
Reception of frame 0x02 (get network
config)
•
Periodically if no periodical data is defined
Periodically
•
•
Beginning or end of presence
Threshold crossing
•
Threshold crossing
•
adeunis
®
www.adeunis.com
Page 14 / 15