Jafar 2005 운영 및 유지보수 매뉴얼 - 페이지 8

{카테고리_이름} Jafar 2005에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jafar 2005 13 페이지. Knife gate valves

- valve type (defined by the product reference standard number)

- nominal diameter

- nominal pressure

- body material

- manufacturer's logo.

A rating plate with the following information is installed at a location specified in the technical

documentation:

-company name and logo,

- serial number of the product,

- temperature class of the seals,

- "B" construction marking and/or "CE" marking (if applicable),

- product type.

3 PROTECTION, STORAGE, TRANSPORT

All internal and external cast-iron surfaces are protected with epoxy paint applied using the

electrostatic method. The paint has a certificate allowing for its use in contact with food products.

The thickness of the corrosion-protection layer is at least 250 µm.

The casting surfaces are prepared for the application of the epoxy layer in accordance with the technical

documentation and the PN-EN ISO 12944-5:2009 standard.

The bolts connecting the body with the cover are stainless steel (A2).).

The gate valves are packaged on EURO palettes (1200x800) and protected using a heat-shrink cover.

The gate valves shall be stored under a roof.

DOKUMENTACJA TECHNICZNO RUCHOWA

03-2016