Game Winner PL200GW 사용 설명서 - 페이지 16

{카테고리_이름} Game Winner PL200GW에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Game Winner PL200GW 20 페이지. 15’ ladder stand

INSTALLATION AND USE INSTRUCTIONS

WARNING

Never use a treestand on a dead, leaning, diseased or

loose barked tree, or a utility pole. Always avoid electrical

power lines.

Bring ratchet strap(s) up with you in a pocket - Do Not

carry in your hands!

STEP 1

1. With assembled product lying on the ground, position

one person at bottom end of ladder lying on the

ground. This person has to prevent the ladder end

from tilting up when platform end is lifted and prevent

the ladder from skidding across ground.

2. a. Position two people at the platform end of the

ladder, lift the platform end and continue uprighting

by walking toward bottom end of ladder and moving

hands along ladder legs. Stand ladder up against

chosen straight tree on dry, level ground. Use

caution when ladder comes over center against the

tree. SEE FIGURE 9A.

b. Step back and look at the ladder top to see that it is

level. Adjust as needed to achieve a level platform top.

Make sure tree blade is contacting tree. SEE FIGURE

9B.

c. Step down hard on bottom step to push ladder legs

into the ground. SEE FIGURE 9C.

STEP 2

3. While two people holding the stand in place, the

third person should connect the horizontal stabilizer

bar to the tree. Adjust the length of the stabilizer bar

as needed so it contacts the tree and is level to the

ground. Then secure it to the tree with the 6' cam strap

(17) by forming a cinch knot with both ends of the

strap and running the long end of the strap through

the cam buckle. SEE FIGURES 10A AND 10B.

During installation and removal of ladder treestands, you

must always and properly use the included Full Body Harness

(Fall Arrest System). Refer to the Full Body Harness instructions

included with this product for proper use.

FIGURE 9

FIGURE

10A

FIGURE

10B

Instruction Manual : 15' LADDER STAND