Maiwe MIEN2204 Series 사용자 설명서 - 페이지 12

{카테고리_이름} Maiwe MIEN2204 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Maiwe MIEN2204 Series 17 페이지. Unmanaged industrial ethernet switch

MIEN2204 Series Unmanaged Industrial Ethernet Switch

Grounding and wiring can effectively suppress the noise impact caused by

electromagnetic interference. The ground connection should be made before

connecting the equipment, from the ground screw to the ground surface.

3.2. Installation

For most industrial applications, it is very convenient to install with 35mm

standard DIN rail. When you remove the device from the packing box, the DIN

rail connection seat should be fixed on the rear panel of the MIEN2204 series

switch. If MIEN2204 series switches need to be mounted on DIN rail, you

should check the installation of DIN rail before installation. It includes the

following two contents:

Whether the DIN rail is fixed and strong, whether other equipment is

installed on the DIN rail, and whether there is enough space for installing the

switch.

Weather Is there any power supply suitable for the work of this switch on

the DIN rail.

After selecting the installation location of the switch, install the switch on

the DIN rail as follows:

Insert the upper part of the DIN rail into the snap groove of the upper part

of the DIN rail connection seat with a snap spring. Push down slightly on the

top panel of the switch and rotate the device as shown in below

cable connection

After the MIEN2204 series switches are correctly installed, the cables can

be installed and connected, mainly including the cable connections of the

following interfaces.

RJ45 interface

Install MIEN2204 series switches to Dil-rail

- 8 -