Maiwe MIEN2208 Series 사용자 설명서 - 페이지 8
{카테고리_이름} Maiwe MIEN2208 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Maiwe MIEN2208 Series 19 페이지. Industrial ethernet switch
Maiwe MIEN2208 Series에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지)
페이지 인쇄
MIEN2208 Series Unmanaged Industrial Ethernet Switch
2. Technical Index
System
indicators
RJ45 port
Fiber port
System
parameters
Copper port
parameters
Fiber port
parameters
Power
parameters
MIEN2208
10Base-T/100Base-TX
100Base-FX
Support standards: IEEE 802.3i, IEEE 802.3u
Switching bandwidth: 1.6Gbps (2.0Gbps for 4 fiber and
4 copper products)
Packet forwarding rate: 1.19Mpps (4fiber 4 copper is
1.488Mpps)
MAC address table: 1K (4fiber ports+4 copper ports are
2K)
Exchange method: store and forward
Broadcast storm suppression (supported by 4 optical
models only)
Physical interface: RJ45 with shield
RJ-45port:10Base-T/100Base-TX,support
auto-negotiation function
Interface standard: comply with IEEE802.3 standard
Transmission distance: 100 meters
Luminous power:> -12dBm (single mode)> -17dBm
(multimode)
Receiver sensitivity: <-38dBm (single mode) <-35dBm
(multimode)
Wavelength: 1310nm (single mode) 1550nm (single
mode)
1310nm (multimode)
Transmission distance: 20 - 80Km optional (single
mode) <5Km (multimode)
Connector type: SC / FC / ST
Transmission rate: 155Mbps
Input voltage:
DC power input range: DC12 ~ 48V and DC48V (36 ~
72V) (support dual power redundant input)
AC power input range: AD220V (AC85 ~ 264V / DC110
~ 370V) (single power supply)
Input power consumption: <5W @ 24VDC (of which
MIEN2208 and MIEN2208GE power consumption is
less than 2W)
Overcurrent protection: built-in
- 4 -