HIKVISION CMHD3553D-Z 사용자 설명서 - 페이지 4
{카테고리_이름} HIKVISION CMHD3553D-Z에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION CMHD3553D-Z 13 페이지. Turbo hd 5 mp series
페이지 인쇄
1 Introduction
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
High performance CMOS sensor
Low illumination, 0.008 Lux@(F1.2, AGC ON), 0 Lux
with IR
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
Internal synchronization
SMART IR mode
PoC (with -E)
3-axis adjustment
Note:
Type II camera is applicable to indoor only.
1.2 Overview
Before you start:
The device cables vary according to different models.
The cables of each type are shown in the figures below,
refer to the actual device.
You can debug the camera by connecting an auxiliary
HD TVI cable to the auxiliary video output.
1.2.1 Overview of Type I Camera
Lens
Menu Button
Bubble
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Lens
Menu Button
Bubble
Figure 1-2 Overview of Type II Camera
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is
power-off during the installation.
Check the specification of the products for the
installation environment.
Cables
Auxiliary
Video Output
Back Box
Cables
Base Plate
Auxiliary
Video Output
Back Box
24 VAC/12 VDC
Power Cord
Model I Cables
12 VDC Power Cord
Video Cable
Model II Cables
24 VAC/12 VDC
Power Cord
Video Cable
Model I Cables
12 VDC Power Cord
Video Cable
Model II Cables
Video Cable