HIKVISION ColorVu 구성 매뉴얼 - 페이지 3

{카테고리_이름} HIKVISION ColorVu에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVu 4 페이지. Camera led supplement light

2.1 Timing mode

1. Selecting Timing in LED Light On, camera will turn on/off the LED supplement light according to

Start/End Time;

2. Setting schedule time according to application requirements. Start time should be earlier than

End Time. Start Time can be on the previous day of End Time.

2.2 Auto mode

1. Camera will detect ambient brightness automatically with Auto mode, and turn on LED light

automatically. The mechanism is similar to the automatic adjustment of infrared supplement

lamplight;

2. Setting filtering time in the range of 0-120s;

When the ambient brightness exceeds the light limit and lasts for a period of time (as shown in the

picture below: 5 seconds), the camera begins to turn the light on and off. This setting prevents the

camera from continuing to turn on and off lights when the brightness changes rapidly;

3. Setting sensitivity in the range of 0-7;

The lower the sensitivity, the greater changing in ambient brightness is required before the camera

can turn on and off the light;

The higher the sensitivity, the lower the requirement of ambient brightness change;

4. Currently, the default mode is Auto. Adjusting the parameters or customizing the firmware if

need to turn off the light by default.