HIKVISION ColorVu DS-2CE DFT-F Series 사용자 설명서 - 페이지 12
{카테고리_이름} HIKVISION ColorVu DS-2CE DFT-F Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVu DS-2CE DFT-F Series 20 페이지. 2 mp turbo hd bullet and turret cameras
HIKVISION ColorVu DS-2CE DFT-F Series에 대해서도 마찬가지입니다: 빠른 시작 구성 매뉴얼 (6 페이지)
페이지 인쇄
Drill the cable hole when using ceiling outlet
NOTE:
to route the cable.
3. Take apart the junction box, and align the screw holes
of the bullet camera with those on the junction box's
cover.
4. Fix the camera on the junction box's cover with three
supplied screws.
5. Secure the junction box's body with supplied screws
on the ceiling/wall.
6. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
Figure 14, Attach Junction Box Cover to its Body
7. Attach the junction box cover to its body with
supplied screws.
8. Repeat steps 5 and 6 of
without Junction Box
2.3
Installation of Type I Turret Camera
2.3.1 Ceiling/Wall Mounting without Junction Box
1. Disassemble the camera.
1) Rotate the camera to align the notch to one of
the marks.
UM ColorVu DS-2CExxDFT-Fxx 122919NA
Figure 12, Drill Template
Figure 13, Install the Junction Box
to complete the installation.
2.2.1 Ceiling/Wall Mounting
12