HIKVISION ColorVU DS-2CE10DFT-F28 사용자 설명서 - 페이지 12
{카테고리_이름} HIKVISION ColorVU DS-2CE10DFT-F28에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVU DS-2CE10DFT-F28 15 페이지. Turbo hd full time color series bullet camera
HIKVISION ColorVU DS-2CE10DFT-F28에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
IMAGE MODE
IMAGE MODE is used to adjust the image saturation,
and you can set it to STD (Standard) or HIGH-SAT (High
Saturation).
WHITE BALANCE
White balance, the white rendition function of the
camera, is to adjust the color temperature according to
the environment. It can remove unrealistic color casts in
the image. You can set WHITE BALANCE mode as AUTO,
or MANUAL.
AUTO
Under the AUTO mode, white balance is being adjusted
automatically according to the color temperature of the
scene illumination.
MANUAL
You can set the R-GAIN/B-GAIN value from 1 to 255 to
adjust the shades of red/blue color of the image.
BRIGHTNESS
Brightness refers to the brightness of the image.
You can set the BRIGHTNESS value from 1 to 9 to
darken or brighten the image. The greater the value is,
the brighter the image is.
CONTRAST
This feature enhances the difference in color and light
between parts of an image. You can set the CONTRAST
value from 1 to 9.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. You can set the SHARPNESS
value from 1 to 9.
SATURATION
Adjust this feature to change the saturation of the color.
The value ranges from 1 to 9.
3 DNR (Digital Noise Reduction)
The 3 DNR function can decrease the noise effect,
especially when capturing moving images in poor light
VIDEO SETTINGS
IMAGE MODE
WHITE BALANCE
BRIGHTNESS
CONTRAST
SHARPNESS
SATURATION
3DNR
MIRROR
BACK
EXIT
SAVE & EXIT
Figure 3-4 VIDEO SETTINGS
Figure 3-5 MANUAL MODE
STD
5
5
5
5
5
OFF