HIKVISION ColorVU DS-2CE10DFT-F28 사용자 설명서 - 페이지 4

{카테고리_이름} HIKVISION ColorVU DS-2CE10DFT-F28에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVU DS-2CE10DFT-F28 15 페이지. Turbo hd full time color series bullet camera
HIKVISION ColorVU DS-2CE10DFT-F28에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

HIKVISION ColorVU DS-2CE10DFT-F28 사용자 설명서
Keep the camera away from liquid while in use for
non-water-proof device.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction

1.1 Product Features

The main features are as follows:
High performance CMOS sensor
Full time color
OSD menu with configurable parameters
Auto white balance
Internal synchronization
Smart light mode
3-axis adjustment
1.2 Overview
This manual applies to two types of bullet camera.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
Figure 1-2 Overview of Type II Camera Installation
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
Table 0-1 Mark Description
Description
DC Voltage
Bracket
Main Body
Lens
White Light
Breaket
Main Body
Lens
White Light
Switch Button
Power Cord
IN
DC12V
Video Cable
Switch Button
Power Cord
IN
DC 12 V
12 VDC
Video Cable