HIKVISION ColorVU DS-2CE10DFT-F28 사용자 설명서 - 페이지 8
{카테고리_이름} HIKVISION ColorVU DS-2CE10DFT-F28에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVU DS-2CE10DFT-F28 15 페이지. Turbo hd full time color series bullet camera
HIKVISION ColorVU DS-2CE10DFT-F28에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
Note:
Drill the cable hole in the center of the drill template,
when adopting ceiling outlet to route the cable.
3. Route the cables through the cable hole (optional)
or the side opening.
4. Fix the camera to the ceiling with supplied screws.
Figure 2-9 Fix the Camera to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5. Connect the corresponding power cord, and video
cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the surveillance angle.
Rotation Position
[0° to 360°]
1)
Loosen the No.1 adjusting screw to adjust the pan
position [0° to 360°]. Tighten the No.1 adjusting
screw.
2)
Loosen the No.2 adjusting screw to adjust the
tilting position [0° to 180°]. Tighten the No. 2
adjusting screw.
Figure 2-8 Drill Template
Figure 2-10 3-Axis Adjustment
Pan Position
[0° to 360°]
1
Tilt Position
[0° to 180°]
2
3