Maiwe MIEN6208-2S 사용자 설명서 - 페이지 17

{카테고리_이름} Maiwe MIEN6208-2S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Maiwe MIEN6208-2S 20 페이지. Management industrial ethernet switch

MIEN6208 Series Management Industrial Ethernet Switch

test diagram takes the 8-port product of the MIEN6208 series switch as an

example.

3.3.3. Fiber ports testing

The device with the fiber interface is composed of the fiber chain network

shown in Figure 3-5 (TX is connected to another RX, and RX is connected to

another TX). Each of the copper interfaces of each device is connected to the

test computer through a direct-connected network cable and sends ping

commands to each other. Both parties can correctly ping each other without

losing packets. At the same time, the LINK lamp corresponding to the optical

port should flash, indicating that the two optical ports tested are working

properly. Figure in below shows the optical port test of the MIEN6208 series

switch.

Normally, this equipment requires three or more switches of this series to

be connected to form a ring.The most typical application example of ring

network technology is in below:

- 12 -