HIKVISION D0T PIR Series 사용자 설명서 - 페이지 16

{카테고리_이름} HIKVISION D0T PIR Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION D0T PIR Series 17 페이지. Turbo hd bullet camera
HIKVISION D0T PIR Series에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

HIKVISION D0T PIR Series 사용자 설명서
Select the !L!RM MODE as SOLID; In this way, the white
light source turns on, when the PIR module received the
alarm signal;
In the TIME SETTING you can set the time as 5 s, 10 s, 15
s, 30 s, or 60 s, which means that the solid mode stays for
the set time when the camera received one alarm signal;
Note:
The solid mode will be stayed for another set time when
second alarm signal is received, and the rest can be done
in the same way;
 FL!SHING
Select the !L!RM MODE as FL!SHING; In this way, the
white light source flashes when the PIR module received
the alarm signal;
OFF
Select OFF to give up this function;
3.6.2 PIR LEVEL
!djust the sensitivity of the PIR module, and the greater
the value is, the more sensitive the PIR module is;

3.7 FACTORY DEFAULT

Reset all the settings to the factory default;
3.8 EXIT
Move the cursor to EXIT and click Iris+ to exit the menu;
3.9 SAVE & EXIT
Move the cursor to S!VE & EXIT and click Iris+ to save the
settings, and exit the menu;
UD10294B
Available from A1 Security Cameras
w.a1securitycameras.com email: sales@a1securitycamera