HIKVISION D8T Series 사용자 설명서 - 페이지 6

{카테고리_이름} HIKVISION D8T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION D8T Series 12 페이지. Turbo hd turret camera
HIKVISION D8T Series에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (17 페이지)

2 Installation

2.1 Installation Preparation

Before you start:

 Make sure that the device in the package is in good

condition and all the assembly parts are included.

 Make sure that all the related equipment is power-off

during the installation.

 Check the specification of the products for the

installation environment.

 Check whether the power supply is matched with

your required output to avoid damage.

 Make sure the wall is strong enough to withstand

three times the weight of the camera and the

bracket.

 If the wall is cement, insert expansion screws before

installing the camera. If the wall is wooden, use

self-tapping screw to secure the camera.

 If the product does not work properly, contact your

dealer or the nearest service center. Do NOT

disassemble the camera for repair or maintenance by

yourself.

2.2 Installing the Lens

Before you start:

You should purchase a lens first.

Steps:

1. Rotate the lens clockwise onto the camera module

tightly.

2. Insert the cable attached on the lens to the lens

socket to finish the lens installation.

3. Connect the corresponding power cord and video

cable.

4. Power on the camera to view the image on the

monitor.

Note:

Do not pull out the cable attached on the lens when

the power is on.

Figure 2-1 Installing the Lens