HIKVISION D8T Series 사용자 설명서 - 페이지 8

{카테고리_이름} HIKVISION D8T Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION D8T Series 17 페이지. Turbo hd turret camera
HIKVISION D8T Series에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (12 페이지)

4. Drill the screw holes according to the drill template,

and the cable hole (optional) on the ceiling.

Note:

Drill the cable hole in the center of the drill template,

when adopting the ceiling outlet to route the cable.

5. Secure the mounting base to the ceiling with the

supplied screws.

Figure 2-8 Fix the Mounting Base to the Ceiling

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are



required to fix the camera. For wooden

wall/ceiling, self-tapping screws are required.

6. Route the cables through the cable hole, or the side

opening.

7. Secure the camera on the mounting base.

8. Connect the corresponding cables, such as power

cord, and video cable.

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Tilt Position

[0°to75°]

Figure 2-7 Drill Template

Expansion Bolts

Fixing Screw

Figure 2-9 Secure the Camera

Pan Position

[0° to 360°]

Figure 2-10 3-axis Adjustment

Rotation Position

[0° to 360°]