Maiwe MIGE1203 Series 사용자 설명서 - 페이지 8

{카테고리_이름} Maiwe MIGE1203 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Maiwe MIGE1203 Series 20 페이지. Industrial gigabit media converter industrial ethernet switch

MIGE1203 Series Industrial Gigabit Media Converter/MIGE2205G Series
Industrial Ethernet Switch

2.2. Power input interface

The DC power supply models of this series of switches support DC12-48V
power supply by default. Optional DC48V, support dual power input, the two
power supplies are mutually backup.
The AC power supply models of this series of switches support
DC110-370V and AC85-264V power, when using AC models, the voltage can
only be input from V1+ and V1-, and V1+ is connected to fire line L, V1-
connect to neutral line N, please do not connect from V2+, V2-, and pay
attention to prevent electrical shock.

2.3. Indicator light

The front panel indicators of this series of switches indicate the current
working status of the switch. Specific instructions is shown as below:
LED
PWR1/PWR2
RUN
L/A1 or G1
Each Ethernet RJ45 port has two indicator lights, the yellow light is the
port rate indicator,the green light is the port connection status indicator.
1G(yellow
light)
Condition
System status LED
ON
Power connect and normally operate
The power is not connected or the
OFF
system is not operating normally
FLICKER
System operate normally
OFF
System fault
Fiber port status LED
Port has established a valid network
ON
connection
FLICKER
Port has network activity
The port has not established a valid
OFF
network connection
Ethernet RJ45 port status LED
ON
1000M Working status
OFF
10/100M working status
- 4 -
Status