Dearborn Deuce Convertible 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Dearborn Deuce Convertible에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dearborn Deuce Convertible 10 페이지.

5. Release the top from the windshield by pulling

down on the header bow release levers.

Once the top is unlatched from the windshield, you can drop the top into the well behind the

seat. If the buggy links should straighten out during this process, the top cannot be folded

all the way down. It may be necessary to unlock them once again by pulling either one (or

both) forward, allowing the top to collapse behind the seat.

Close the tonneau cover firmly to catch the second latch.

To open the top, the sequence is as follows:

1. Release the tonneau lever in the B-pillar and open the tonneau.

2. Pull the top completely out of the well and align the front locating pins with the

holes in the top of the windshield.

3. Fold the rear part of the top forward and close the tonneau.

4. Drop the rear of the top back, allowing it to seat on the rear deck, and push

the buggy links toward the rear to lock them and seat the top.

5. Flip the front latches into the locked position.

CAUTION: When locking the buggy links, push only against the tab that is

provided on these links; NEVER put fingers into the area of the hinge joint

or pinching can result).

6. Flip the windshield latches "up" to lock the top to the windshield.

7.0

Installation of Body Seals.

All of the necessary body seals are supplied with your Dearborn Convertible. Note

that the trunk and tonneau seals are in place. They have not been permanently fixed

into the body, however, as they must be removed for painting.