Gree GGD18L 사용자 설명서 - 페이지 8

{카테고리_이름} Gree GGD18L에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree GGD18L 20 페이지.

Humidity Button

Press Humidity button to set your desired humidity. If hold Humidity

button, humidity can be set in 10% increment among 30%-80% circularly.

After that, the set humidity will be displayed for 5s.

Mode Button

4 kinds of dehumidify mode can be set when pressing Mode button- Smart,

Cont., Quiet and Dry.

● If Smart indicator is on, it indicates the unit enters into smart mode. The

unit will intelligently select the comfortable humidity for human according

to current temperature.

● If Cont indicator is on, it indicates the unit enter into continuous dehumidify

mode. The unit will always dehumidify only until the humidity is decreased

to the inapplicable humidity of human.

● If the Quiet indicator is on, the unit enter into quiet mode. The unit will

intelligently select the comfortable humidity for human according to current

temperature. The unit will operate at the fan speed with lowest noise.

The fan speed can't be adjusted in this mode.

● If the Dry indicator is on, the unit enters into dry mode. After clothes are

dried, room humidity will be kept at certain range to prevent mildew. Under

dry mode, fan speed and humidity can't be adjusted.

Note:

● Under Smart mode and Quiet mode, if room humidity is lower than set

humidity, or lower than the defaulted comfortable temperature, the unit will

stop dehumidifying.

● Under Dry mode and Cont mode, the humidity can not be adjusted. Under dry

mode and quiet mode, fan speed can not be adjusted.

Wind Direc Button

When swing of horizontal louver is needed, press Wind Direc button to

select swing or fixed angle. When Swing light of Wind Direc indicator is on,

the horizontal louver begins to swing; when Fixed Angle light is on, the

horizontal louver stays at current position.