Gree XK-19 기술 제품 설명서 - 페이지 8

{카테고리_이름} Gree XK-19에 대한 기술 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree XK-19 11 페이지. Air conditioner controller
Gree XK-19에 대해서도 마찬가지입니다: 소유자 매뉴얼 (2 페이지)

INSTALLATION

The following is a brief XK-19 and XK-41 Wired Tether

Controller installation overview. See Wired Controller

Installation Manual for more detailed instructions on

installation, start-up, and setup.

Connecting Indoor Unit

Select a proper location on the wall for mounting

the Tether Controller. Install switch box, if required

by code. Locate the 26-ft communication cable that

came with the Tether Controller. Run communication

cable (as desired) between indoor unit and selected

wall mounting location. Locate the Tether Controller

connector in the control box area of the indoor unit.

Carefully connect communication cable to indoor unit.

Wired Tether Controller Installation

Pull communication cable through switch box (if

one is used) and Wired Tether Controller backplate.

Securely fasten backplate to the switch box or wall.

Carefully connect communication cable to rear of

Wired Tether Controller panel. Push extra cable into

wall and secure controller panel to backplate mounted

on the wall.

NOTE: Do not cut and splice communication cable.

Follow the start-up setup instructions supplied with

the Wired Tether Controller.