Majacraft Pioneer 조립 지침 - 페이지 7

{카테고리_이름} Majacraft Pioneer에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Majacraft Pioneer 11 페이지.

6. Drive Band

Required:

1 - Green drive band (in the hardware bag)

7. Crank Assembly

Required:

Crank assembly

3 - Silver 38mm (1 1/2") screws (in the hardware bag)

Posidrive screwdriver

The drive wheel has been predrilled with the holes for the aluminium crank assembly which line up

with the holes on the crank assembly. Make sure the drive belt is on before starting!

Similar to the base/stem assembly process, do not

fully tighten the centre screw until you have aligned

and started screwing in the two screws on the sides.

The green drive band goes on the groove on the drive wheel and

then through one of the grooves on the pulley.

Align the holes on the drive wheel with the holes in

the crank assembly and screw it into place using the

posidrive screwdriver on the silver 38mm screws.

It is recommended that you insert the centre screw

first. This will reduce your chances of possibly

scratching your drive wheel.

majacraft