Gree XK41 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Gree XK41에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree XK41 19 페이지. Command center for ductfree split systems
Gree XK41에 대해서도 마찬가지입니다: 기술 제품 설명서 (11 페이지), 소유자 매뉴얼 (2 페이지)

페이지 인쇄

2 Buttons

2.1 Layout of Buttons

2.2 Functions of Buttons

No.

Name

Enter/Cancel

▲

▼

Fan

Mode

Function

Timer

On/Off

4+2

▲+Mode

3+6

Fan+▼

2+6

▲+▼

Function selection and cancellation.

Running temperature setting of the indoor unit, range:16~30

① .

Timer setting, range:0.5-24 hr.

② .

Setting of the high/middle/low/auto fan speed.

Setting of the Cooling/Heating/Fan/Dry/Auto mode of the indoor unit.

Switchover among the functions of Turbo/Save/E-heater/Blow etc..

Timer setting.

Turn on/off the indoor unit

Press them for 5s under off state of the unit to enter/cancel the Memory

function(If memory is set, indoor unit after power failure and then power

recovery will resume the original setting state. If not, the indoor unit is

defaulted to be off after power recovery. Memory off is default before

delivery.).

By pressing them at the same time under off state of the unit,

displayed on the wired controller for the cooling only unit, while

displayed on the wired controller for the cooling and heating unit.

Upon startup of the unit without malfunction or under off state of the

unit,press them at the same time for 5s to enter the lock state, in which

case,any other buttons won't respond the press. Repress them for 5s to quit

this state.

Wired Controller XK41 & XK47

Table 2.1

Function

will be