Majacraft Suzie 매뉴얼 - 페이지 5

{카테고리_이름} Majacraft Suzie에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Majacraft Suzie 12 페이지.

3. Attach stem to base assembly

Required:

4 - M6x30mm JCB (1 1/4") bolts (in the hardware bag)

4mm allen T-wrench

Stem/Handle/Drive wheel assembly

Base/Pedal assembly

The drive wheel should go on the same side of the Base/Pedal

assembly as the narrow end of the pedals.

Position the Base assembly on the flat surface. Now

slide the SHDW assembly into the Base assembly

and carefully align the stem holes with the base side

plate holes. Insert the JCB bolts through the holes

and into the SHDW assembly. Partially tighten the

bolts, checking that they are threaded in correctly

before finally tightening all bolts.

majacraft