Gree HLR14Pd/Na-M 유닛 설치 매뉴얼 - 페이지 12
{카테고리_이름} Gree HLR14Pd/Na-M에 대한 유닛 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree HLR14Pd/Na-M 18 페이지. Mini chiller
페이지 인쇄
Unit Installation
◆ HLR12Pd/Na-M, HLR14Pd/Na-M
4.8 Wiring of the 2-Way Valve
The 2-way valve is required to control water flow for cooling operation. The role of 2-way valve is to cut off
water flow into the underfloor loop when the fan coil unit is equipped for cooling operation.
General Information
Type
NO 2-wire
NC 2-wire
(1) Normal Open type. When electric power is NOT supplied, the valve is open. (When electric power is
supplied, the valve is closed.)
(2) Normal Closed type. When electric power is NOT supplied, the valve is closed. (When electric power is
supplied, the valve is open.)
How to Wire 2-Way Valve:
Follow steps below to wire the 2-way valve.
Step 1. Uncover the front cover of the unit and open the control box.
Step 2. Find the terminal block and connect wires as below.
Power
230V 50Hz 1Ph AC
230V 50Hz 1Ph AC
4
5
6
XT2
2-Way Valve 2
Operating Mode
Closing water flow
Opening water flow
Closing water flow
Opening water flow
10
11
12
2-Way Valve 1
10
Supported
Yes
Yes
Yes
Yes