CentralPneumatic 60638 소유자 매뉴얼 - 페이지 12

{카테고리_이름} CentralPneumatic 60638에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CentralPneumatic 60638 16 페이지. Cast iron twin cylinder air compressor pump

Oil Maintenance

Check the oil periodically for clarity. Replace oil if it appears milky or if debris is present,

or every 6 months, or 100 hours of runtime, whichever comes first.

In harsh environments such as high heat or high humidity, you will need to replace the oil more frequently.

cAUTION! TO PREVENT INJURy FROM BURNS:

Allow compressor Pump to cool before changing the oil.

1. Place a container under the Oil Drain Plug.

2. Remove the Oil Fill Plug to allow

air flow into the Pump.

3. Remove the Oil Drain Plug, allowing

the oil to drain into the container.

4. When the oil is completely drained from the Pump,

replace the Oil Drain Plug.

Check the Air Filter weekly to see if it needs replacement.

If working in dirty environments, you may need to replace the filter more often.

1. Remove the Air Filter Front Cover.

2. Remove the Air Filter element.

Page 12

For technical questions, please call 1-800-444-3353.

5. Fill the Pump with new SAE 30W,

non-detergent, Air Compressor Oil to the

FULL level on the Oil Sight Glass.

6. Replace and tighten the Oil Fill Plug.

7. Discard the old oil according to local,

state and federal regulations.

3. Replace with a new Air Filter element.

4. Replace the Cover.

Item 60638