Adexa CP-140IR 사용자 설명서 - 페이지 2

{카테고리_이름} Adexa CP-140IR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Adexa CP-140IR 6 페이지. Electric adjustable conveyor oven

Adjust the speed of conveyor to control the color of toasting bread. The feed ramp can lead

bread on to the conveyor. The toast crumb tray collect crumb easily. The front and rear

discharge can be changed to use. To ensure proper operation, please read this manual

carefully before using. After reading, keep this manual in a convenient place for further

reference.

1. Technical Parameter

Model

Voltage(V)

Power(W)

Frequency(Hz)

Dimension(mm)

Conveyor belt

width

2. Electricity installation

2.1.Make sure the supplied voltage is coordinated with the using voltage.

2.2.The power wire should be connected the special socket which lead through the special

air switch and the electric leakage protector. Make sure the ground wire connection is

connected well. For convenient operation, ban to pile up the sundry goods near the

switch.

3.1 . This conveyor oven has been designed to continuously produce toasted bread or buns.

The desired toasted colour of the product can be adjusted by changing the belt speed of the

conveyor and the individual heat controls for the top and bottom elements. Depending on

installation position the toasted product can be discharged to the front or rear of the unit.

3.2. Before operating this unit thoroughly clean as described in the cleaning section of this

leaflet.

3.3. As detailed in the diagrams below the unit can either be assembled with front or rear

discharge depending on installation position and preference.

3.4. The unit has three controls.

i. Speed or colour control determines the length of time the toast or product is in the

heating chamber. Obviously, the slower the speed the longer the exposure the darker the

product.

CP-105IR

220-240

2600

50/60

1029x447x495

10 ½"

CP-140IR

220-240

3600

50/60

1029x522x495

14"