Adexa CP-18S 사용자 설명서 - 페이지 9

{카테고리_이름} Adexa CP-18S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Adexa CP-18S 14 페이지. Electric conveyor pizza oven

versa. Please adjust the voltage input if baked food is different. After memory

is done, the digital display shows the temperature of interior chamber. The

display has no function of temperature adjusting

ATTENTION! The operation of the device may only be carried out by personnel that

have been instructed in operation of the device

Make sure the power cord connection is

not loose. Start operating the unit after checking and confirming every detail is all right.

Unfold the pizza pan plate before operating. After finishing, fold it as before to cover mesh

net. After a period of using, check the fix screw. Fasten it when necessary. Adjust the gap by

fixing the warming plate to suitable height to minimize the heat loss. Adjust the screw which

fixes the fix holder to adjust tightness of mesh net. (It has been pre-set well when it leaves

factory.) Start working when everything is ready. When power is supplied to unit, the unit is

ready to be operated. The unit is in the Waiting state. Press the Power on/off switch to start

the unit. The indicator is red. When it is operating, press Power on/off switch, the indicator

becomes green and returns to waiting state.

Setting of top and bottom heating elements

When it is operating, press setting key of top and bottom heating. #13 begins to flash. Press

#4 or #5 to increase or decrease the temperature. When #13 is flashing, it is ready for

re-setting. The maximum value displayed is 300, minimum 0. In 8 seconds, the set value will

be memorized.

After memory is done, the digital display shows the

temperature of interior chamber. The display has no function of

temperature adjusting

Setting of rotating speed

When it is ready, press #9 or #8 to increase or decrease rotating speed of motor. The value

ranges from 4 to 75. The setting value would be memorized in 8 seconds.

Rotating direction of motor

It can be changed by pressing #6 or #7. The setting would be memorized in 8 seconds. Put

pizzas at one end. The ready pizzas come out at the other end. The rotating speed would

affect the baking result. Generally, we use the clockwise rotation. If the baking result is not

very satisfactory, press the anti-clockwise key to bake it again. Cut power supply off. When

something wrong occurs, please stop using it right away. Call for a qualified technician for

repair. Cooling fan would continue to work for another 20 minutes to cool down the IC

board when heating function is switched off. If whole machine is cut off power supply

before 20 minutes is out, hot air might damage the IC board

6. Transportation, Cleaning and maintenance

6.1 Transportation

In the process of transportation, the appliance should be handled carefully, preventing the

intense shaking. The packaged appliance should be stored in a well-ventilated area free of

caustic air. It cannot be placed in the outside area and should never be put upside down.