Adexa HA-35 사용자 설명서 - 페이지 3
{카테고리_이름} Adexa HA-35에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Adexa HA-35 4 페이지.
페이지 인쇄
●
Immediately stop using the heater if the plug or cord is damaged. Do not detach
yourself when the heater failed or damaged in any way. Please take it to the
manufacturer of qualified personnel for maintenance.
●
Please operate the heater as described in the instructions. Any other non-recommended
use may cause fire, shock, or injury.
●
Avoid using extension cords because it may cause overheating or fire hazard.
●
Pull the plug from the outlet when not use the heater.
●
In case of damage, it must be repaired by professional electricians.
●
Please contact with seller if it does not work properly. Do not try to repair the
heater by yourself.
●
Cleaning and user maintenance shall not be made by children with supervision.
●
Do not immerse the heater into water for cleaning.
WARNING AND CAUTIONS
1.
Put the plug into the power socket.
2.
The heater has two power ranges: 350W and 700W.
3.
Turn control knob to left without oscillation function: LOW(350W) or HIGH(700W).
4.
Turn control knob to right with oscillation function :
(oscillation+700W).
HIGH
5.
Fig 2 is the angle knob with two angle modes: 120° and 360°. When using the
oscillation function, turn angle knob to left 120° and turn right 360°.
6.
Switch the heater off by turning control knob to OFF-position.
7.
Remove plug from the power socket.
Fig 1
Fig 2
(oscillation+350W) or
LOW
LOW
: 350W
HIGH
: 700W
: OSC+350W
LOW
:OSC+700W
HIGH
2