Bristan 1901 피팅 지침 및 내용물 목록 - 페이지 2
{카테고리_이름} Bristan 1901에 대한 피팅 지침 및 내용물 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan 1901 9 페이지. Sink mixer
Bristan 1901에 대해서도 마찬가지입니다: 피팅 지침 및 내용물 목록 (8 페이지), 피팅 지침 및 내용물 목록 (4 페이지)
페이지 인쇄
BRISTA
Introduction
Thank you for choosing Bristan, the UK's leading taps and
show
ers expert. We have designed this product
w
ith
your enjoyment in mind.
To
ensure that it
w
orks to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to gi ve you all of the information you need and, if you need
any
further help, please
do not hesitate to gi ve us a call on 0844 701 6273.
Safety Note
Please read these instruction
thoroughly
and retain for future use
.
All product manufactured and supplied
by
Bristan are safe provided
they
are installed correctly, used
correctly
and
recei ve regular maintenance in accordance
w
ith these instructions.
This fitting need to be installed in accordance
w
ith and meet the requirements of the Water
Supply
[Water
Fittings) Regulations 1999 and Scottish
Byelaw
s
2004.
Specification
Operating pressure range [bar)
Maximum Static pressure - 10.0 bar
Min
.
0.2
NOTE :-
Nominally
equal [balanced) inlet
supply
pressures are recommended for optimum
performance.
Installation
Ma x.
8.0
140
180
180
1.
Identify
all components and check for completeness,
particularly
before commencing installation.
2.
Fit the legs [1
l
to the
body
using the large sealing
w
ashers [2).
3.
Fit the mixer to the bath using the backnuts [4) and
w
ashers [3). connect the hot and cold
w
ater supplies.
4.
Fully
open both valves, letting them run for a
few
minutes to check all joints and connections for leaks.