Majestic VF32C 설치 및 운영 지침 매뉴얼 - 페이지 14

{카테고리_이름} Majestic VF32C에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Majestic VF32C 20 페이지. Vf, vfr series vent-free fireboxes

VF/VFR Vent-Free Fireboxes

7. If the duct is the insulated type, push the insulation back

from one end of the duct approximately ". Figure 19

8. Slip the exposed end of the duct over the starting collar

on the fireplace.

9. Using the sheet metal screws provided, secure the duct

end to the collar attached to the fireplace.

10.Nail or screw the combustion air assembly to the surface

of the wall.

NOTE: If the wall covering is brick or stone, use

appropriate masonry fasteners. If necessary, splice

the duct. Use a model 403-duct connector to splice

duct sections.

INSTALL MODEL 403 DUCT CONNECTOR

1. Push insulation back approximately " from the end of

each duct.

. Slip each duct over duct connector until an equal length

of connector extends into each duct.

3. Place duct clamp over the end of each duct. Tighten

duct clamp down snuggly.

4. Push insulation back into place and over duct clamp.

Duct

Connector

Figure 19 -

Install Duct Connector 403

FP1907

Duct connector

8/08

COMBUSTION AIR

Insulation

Approximately

Duct

Duct Clamp

FP1907

71D0531