Adexa UC200-2036D 설치 설명서/사용 및 관리 설명서 - 페이지 18

{카테고리_이름} Adexa UC200-2036D에 대한 설치 설명서/사용 및 관리 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Adexa UC200-2036D 20 페이지. Under-mount hood

REPLACING THE LED LIGHT BULBS

CAUTION: LED lamps can only be replaced with a new LED lamp. The lamp rating must be equal to the one

already used. Make sure all the control switches are off and the hood is unplugged, or the breaker is OFF.

Replacing the LED light fixture:

• This range hood uses LED light fixture: 3W Max 12V LED

• Make sure the range hood is unplugged or turn OFF breaker and make sure the lights are cool to touch.

• Place a flat-head screwdriver between light housing and hood body, gently pry up the light

housing and search for the metal clip.

• Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and discard

the old light fixture.

• Reverse the steps to install a new LED light fixture. Turn ON breaker and range hood to test for operation.