Bristan DSC WMBF C 설치 지침 및 사용자 설명서 - 페이지 10
{카테고리_이름} Bristan DSC WMBF C에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan DSC WMBF C 18 페이지. Descent tap range
Bristan DSC WMBF C에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (16 페이지)
페이지 인쇄Installation Cont.
Wall Mounted Basin Mixer and
Bath Filler
1. Decide on the final position of the basin
mixer/bath filler. Install suitable batons into
the wall cavity if required to support the
tap body.
2. Plumb the hot and cold water supply
pipes to the required position.
3. Secure mixer body using the screws and
wall plugs supplied.
4. Attach the supply pipework to the hot
and cold inlets (hot on the left and cold on
the right when viewed from the front) en-
suring the olive is fitted to the copper pipe
work. Tighten the compression nut to secure
the pipework and create a water tight seal.
Note: Before finishing the wall surface turn
on both water supplies to check for any
leaking connections.
5. Finish the wall surface.
Note, it is important that a sufficient amount
of the spout connecting tube and valves are
left exposed to allow the spout and valve
shrouds to fit.
6. Fit the spout and tighten the grub screws
to secure in position.
7. Screw the valve shrouds onto the valves
using the screws supplied. Push the plinth
over the shroud.
8. Fit the spline adaptors to the valve splines
using the screws and washers supplied.
9. Push the handles onto the valve shrouds
and tighten the grub screws.
10. Turn on both water supplies and operate
the handle letting the water flow for a few
minutes to flush the system.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
10