Majestic BT 1680R MP4 사용자 설명서 - 페이지 18
{카테고리_이름} Majestic BT 1680R MP4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Majestic BT 1680R MP4 20 페이지.
페이지 인쇄option with PRE/NEXT keys and confirm with PLAY key.
To exit settings press OPTIONS key until it shows main menu.
Max volume limit
Display
Energy saving
Turn off timer
Language
Info
Format
Restore
to
factory
settings
Documents
By this function it is possible to view text files in TXT format.
Battery charging
The player has a built-in rechargeable battery which can be charged by using USB cable connecting to
PC. The charging status of the battery will be shown on display. To charge the unit turn on the PC and
connect to it by using the supplied USB cable. The player should charge completely in about 4/5 hours
(the charging time depends on the battery charging status).
Trouble shooting
No power
No sound from the
Earphone
Can not download File
It allows to set a limit beyond which the volume cannot be increased
further
Brightness: allows to adjust the brightness level of display
Turn off: allows to set the time after which display can turn off
automatically if no key is pressed ("always on" option allows to keep
display always on)
allows to set the time after that the player will be off automatically if
not in use (set OFF to turn off the function)
Allows to set a timer (from 1 to 99 minutes) to make the unit turn off
automatically (choose OFF to turn off the function). The function will
be automatically disabled by turning off the unit.
Chinese/English/German/Italian
Display the status of microSD card
Display the firmware information
Allows to format microSD card
Restore the unit to factory settings
Check if the battery have enough power.
Check if the power switch is not OFF.
Make sure the volume is not at the 0 level.
Make sure the earphone is connecting with the player correctly.
Make sure the earphone is clean.
The damaged player may have some kind of noise or even
cannot have audio output.
Make sure your downloaded files are not damaged and that are
supported by the player.
Check if the USB connection is ok.
Check if there is available space in memory.
17