Bristan GLR WMBAS C 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} Bristan GLR WMBAS C에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan GLR WMBAS C 16 페이지. Glorious tap range

Installation

1. Screw the flexi tails into the bottom of

the body by hand only (DO NOT

OVERTIGHTEN).

2. Feed the flexi tails through the hole in

the basin ensuring the washer is fitted

between the tap body and fixing surface to

ensure a water tight seal.

3. Screw the fixing rod into the bottom

of the mixer body. Slide the 'C' shaped

rubber washer and 'C' shaped metal

washer onto the fixing rod up to the

underside of the basin.

4. To secure the mixer body in place

tighten the fixing nut onto the fixing rod

until they are fully tightened against the

'C' shaped metal washer. The fixing nut

can be tightened with a suitable spanner.

5. Connect the flexi tails to the hot and

cold water supplies.

6. Turn on both water supplies,

operate both handles, letting the water

flow for a few minutes to flush through

the system.

7. Check all joints and connections for any

leaks.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.