Bristan Hourglass HOU BSM BLK 설치 지침 및 사용자 설명서 - 페이지 10

{카테고리_이름} Bristan Hourglass HOU BSM BLK에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan Hourglass HOU BSM BLK 20 페이지.

Installation Continued

Bath Shower Mixer

Identify all components are present prior to starting installation

Position O-Rings (11) in the groove on the underside of the mixer body (9) and

install to the bath

Using the washers (12) and the backnuts (13), secure the mixer body (9) to the

bath by tightening the backnuts (13) onto the pre-fitted threaded tails. A

suitable spanner may be required to fully tighten the backnuts (13)

Connect the hot & cold water supplies using ¾" tap connectors (not supplied)

Fit the shower hose (15) to the hose outlet using the small washer and the

handset (16) to the hose using the small washer

Fit the wall bracket (not shown) to the wall using the fixings supplied, ensuring

the handset (16) and hose (15) reach it.

Turn the handles in both directions, letting the water flow for a few minutes to

check all joints and connections

To switch from bath to shower mode, pull the diverter knob (7) up, to revert

back to bath filling mode, push the diverter knob back down

1. Grub Screw Cap

2. Grub Screw

3. Handle

4. Shroud

5. O-Ring

6. Spline Adaptor

7. Diverter Knob

8. Ceramic Disc Valve

9. Mixer Body

10. Anti-Splash

11. O-Ring

12. Rubber Washer

13. Metal Backnut

14. Diverter Mechanism

15. Hose

16. Handset