Bristan IRBS1-CP 설치 지침 및 사용자 설명서 - 페이지 15

{카테고리_이름} Bristan IRBS1-CP에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan IRBS1-CP 20 페이지. Infrared automatic basin spouts

Installation - Water Connections

Flexible Connecting Hose

Care must be taken when connecting the flexible connection hose from the power

supply box to the spout to ensure it does not bend sharply and kink or twist.

See below for recommended ways to fit the flexible connecting hose.

Slight

bend

Operation

Using the Automatic Basin Spout

Place the users hands under the spout

within the sensing range. Once the users

hands have been detected water will flow

constantly until the hands are removed.

After 55 ± 5 seconds the water will stop

flowing.

If the user requires more water remove

hands from the sensing range and wait 4

seconds, then place the hands back into

the sensing range and the water will flow

again.

Note: The sensing range for all models is

23-26cm from the sensor.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

90°

angle

Kinks

Twists

Important:

Failure to follow these

guidelines may result in

poor performance and

damage to the flexible

connection hose.