Bristan IRBS4-CP 설치 지침 및 사용자 설명서 - 페이지 7
{카테고리_이름} Bristan IRBS4-CP에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan IRBS4-CP 20 페이지. Infrared temperature control automatic basin spout
Bristan IRBS4-CP에 대해서도 마찬가지입니다: 설치 지침 및 사용자 설명서 (16 페이지)
페이지 인쇄
Installation Requirements
Electrical Connections
Regulations: The electrical installation
must be carried out in accordance with
the national electrical regulations and
installed by a qualified person.
Safety: In the interests of electrical safety
a 30 mA residual current device (R.C.D not
supplied) should be installed in the supply
circuit. This may be part of a consumer
unit or a separate unit.
Before starting work on the electrical
supply ensure the power supply is
isolated.
DO NOT allow the supply cord to contact
hot surfaces. The cord should be safely
routed and secured by cable clips.
Connections: The power supply box must
be permanently connected to the fixed
wiring of the mains supply using the
factory fitted supply cord, via a switched
fused spur off the ring main.
The wires in the mains lead are coloured
in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your connection unit proceed
as follows;-
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter 'N' or is coloured
black.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter 'L' or is coloured
red.
N
L
Fuse: This following fuse size should be
used.
Model
IRBS4-CP
IRBS4-BZ
IRBS4-BN
Supply Cord Replacement
If the supply cord is damaged, it must be
replaced by a genuine Bristan supply cord.
Contact Bristan Customer Services on
0844 701 6273 to request new spare parts.
Fuse Size (AMPS)
3
3
3
7