Aguilar DB 659 매뉴얼 - 페이지 4

{카테고리_이름} Aguilar DB 659에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aguilar DB 659 5 페이지. Tube bass preamp

OUTPUT INTERFACES:

Rear Panel:

XLR Balanced Output:

Use the –40db pre-eq setting in a concert situation where the house mixer is taking a signal into

the house-mixing console. The house mixer is now getting his feed after the preamp stage, but

can use appropriate eq for the venue. The eq on stage will still be controlled by your settings. If

the house mixer wants your eq settings included in the mix, set the control to –40 post eq. The –

40 level is correct output level for going into a preamp on a mixer. Our balanced output uses the

highest quality Jensen output transformer. If you hear any ground noise, change the position of

the ground lift switch under the output.

¼" unbalanced outputs:

Two full-range mono outputs are provided for connection to your power amp.

FX Send:

Connect the input of your effects unit to this output.

FX Return:

Connect the output of your effects unit to this input.