Bristan Liquorice Kitchen Sink Tap 설치 지침 및 사용자 설명서 - 페이지 4
{카테고리_이름} Bristan Liquorice Kitchen Sink Tap에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan Liquorice Kitchen Sink Tap 14 페이지.
페이지 인쇄
BRISTA
Important Safety Information Cont.
• Please read these
instructions
thoroughly and retain for future use
.
• All products manufactured and supplied by Bristan are safe provided they are installed
correctly, used correctly and receive regular maintenance
in
accordance
with
these
instructions.
• If you are in any doubt about your ability to install this product safely you must employ the
services of an experienced qualified plumber.
• Remove all packaging and check the components for damage before starting
installation
.
•
/ ! \
Before starting any installation please consider the following
:
Prior to drilling into
walls,
check that there are no hidden electrical wires, cables or water supply pipes
.
This can be
checked with the aid of an electronic detector.
• If power tools are used do not forget to
:
-
Wear eye protection
-
Unplug equipment after use
• This product must not be modified
in
any way as this will invalidate the guarantee
.
• These fittings need to be installed in accordance with and meet the requirements of the Water
Supply [Water Fittings] Regulations 1999 and Scottish Byelaws
2004.
General Specifications
Operating pressure range [bar]
Min
1.0
Max
7.0
Maximum static pressure - 10 .0 bar
NOTE :- Nominally equal [balanced] inlet supply pressures are recommended for optimum
Performance of mixer taps
.
Designed to comply
with
BS EN 200 for single taps/ combination taps for
water
systems of type 1
and 2 general technical specifications; and to be used
within
systems designed to BS 6 700
.
BS 6 700 recommends the temperature of stored water should never exceed 65°C
.
A stored water
temperature of 60°C is considered sufficient to meet all nominal requirements and will minimise
the build up of lime scale in hard
water
areas
.
04